g2 optima plus repair parts g2 sloan flush valve g2 flushometer optima plus repair parts G2 flushometer
IIIREPAIR SERVICEIIIIIIII PARTS & UNITS INDEXIII IIII ABOUT USIIIIIIII HOME
optima plus repair parts sloan flush valve flushometer optima plus repair parts sloan flush valve flushometer
EQUIPARTS IS A MASTER REPAIR PARTS DISTRIBUTOR OF GENUINE SLOAN FLUSHOMETER PARTS
sloan repair parts sloan repair parts sloan repair parts sloan repair parts sloan repair parts sloan repair parts sloan repair parts
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIICOVERS
sloan repair parts
 
# 8291
Plastic Cover with
Override Button
less Locking Ring
sloan sloan sloan sloan sloan sloan
sloan sloan sloan sloan sloan sloan
sloan sloan sloan sloan sloan sloan
 
 
sloan repair parts
 
# 8403
Plastic Cover
less Locking Ring
sloan sloan sloan sloan sloan
sloan sloan sloan sloan sloan
sloan sloan sloan sloan sloan
sloan sloan sloan sloan sloan
 
  sloan repair parts
optima optima optima optima optima
sloan sloan sloan sloan sloan
# 8399
Metal Cover with
Override Button
Includes Locking Ring
sloan sloan sloan sloan sloan
sloan sloan sloan sloan sloan
sloan sloan sloan sloan sloan
   
sloan repair parts
 
sloan sloan sloan sloan sloan
sloan sloan sloan sloan sloan
# 8393
Metal Cover
Includes Locking Ring
sloan sloan sloan sloan sloan
sloan sloan sloan sloan sloan
sloan sloan sloan sloan sloan
sloan sloan sloan sloan sloan
  sloan sloan sloan sloan sloansloan sloan sloan sloan sloan sloan sloan sloan sloan sloansloan sloan sloan sloan sloan
sloan sloan sloan sloan sloan sloan sloan sloan sloan sloan
ELECTRONIC MODULES FOR
OLD STLYE OPTIMA PLUS
Includes Base with Solenoid
sloan repair parts
sloan sloan sloan sloan sloan
# 8709
For Urinals - 1.0, 1.5, and 3.0 GPF
optima optima optima optima optima
# 8712
For Closets - 1.6 and 3.5 GPF
 
 
  NOTE ! YOU MUST USE FLEX TUBE DIAPHRAGM ASSEMBLY TO OBTAIN CORRECT GPF!

 

 sloan sloan sloan sloan sloan
sloan sloan sloan sloan sloan
# 8398
Base with Solenoid
sloan sloan sloan sloan sloan
sloan sloan sloan sloan sloan
sloan sloan sloan sloan sloan sloan sloan sloan sloan sloan
FLEX TUBE DIAPHRAGM ASSEMBLY
sloan g2 optima plus g2 g2 g2 g2 g2 g2 g2 g2 g2 g2 g2 g2 g2
sloan repair parts
# 8695
Includes 0.5 GPF
Volume Regulator
 
sloan sloan sloan sloan sloan
# 8137
Includes 1.0 and 1.5 GPF
Volume Regulator
 
sloan sloan sloan sloan sloan
# 8710
# 8285
Includes 2.4 GPF
Includes 1.6 and 3.5 GPF
Volume Regulator
Volume Regulator
optima optima optima optima optima optima optima optima optima optima
|||
  
 
 
OLD STYLE RETRO ASSY.
NO LONGER AVAILABLE
 
sloan sloan sloan sloan sloan
sloan sloan sloan sloan sloan
sloan sloan sloan sloan sloan  
sloan sloan sloan sloan sloan  
# 34727
Heavy Duty
Strap Wrench
 
Prevents unsightly
wrench marks
 
sloan sloan sloan sloan sloan sloan sloan sloan sloan sloan
sloan sloan sloan sloan sloan optima optima optima optima optima
# 8421
Chrome Locking Ring
for Cover
optima optima optima optima optima
# 8543
Locking Ring - for Zurn only
   
   
sloan sloan sloan sloan sloan sloan sloan sloan sloan sloan
optima optima optima optima optima
# 8588
optima optima optima optima optima
Optima Plus Repair Parts Kit
optima optima optima optima optima
Master Kit for Battery
Operated Flushometers
 
We can customize any
requirements you have!
 
sloan sloan sloan sloan sloan optima optima optima optima optima
sloan sloan sloan sloan sloan sloan sloan sloan sloan sloan
optima optima optima optima optima
# 8396
Solid Handle Cap Nut
 
# 8416
Decorative Handle Cap Nut
optima optima optima optima optima optima optima optima optima optima
sloan sloan sloan sloan sloan sloan sloan sloan sloan sloan
# 8470
3/4" Decorator Control
Stop Cap Nut
 
# 8419
1" Decorator Control
Stop Cap Nut
  sloan sloan sloan sloan sloan
  optima optima optima optima optima

 
|||DOWNLOAD A PDF VERSION OF THIS GUIDE HERE.||||
1
# 8696
G2 COVER/RING/SENSOR ASSY -CLOSET
# 8699
G2 COVER/RING/SENSOR ASSY -URINAL
Also available to fit Zurn
2
# 8701
COVER ASSY.
3
# 8715
|OVERRIDE BUTTON ASSY. (Includes screws and hex wrench)
# 8707
SCREWS AND HEX WRENCH ONLY
4
# 8705
LENS WINDOW COVER
5
# 8421
LOCKING RING
6
# 8697
G2 ELECTRONIC MODULE - CLOSET
# 8698
G2 ELECTRONIC MODULE - URINAL
7
# 8702
PLASTIC SUB BASE
8
# 8720
BASE W/SOLENOID
9
# 8721
G2 SOLENOID ONLY
10
# 8695
FLEX TUBE DIAPHRAGM ASSY. (Includes 0.5 gpf volume regulator)
# 8137
FLEX TUBE DIAPHRAGM ASSY. (Includes 1.0 and 1.5 gpf volume regulator)
# 8285
FLEX TUBE DIAPHRAGM ASSY. (Includes 1.6 and 3.5 gpf volume regulator)
# 8710
FLEX TUBE DIAPHRAGM ASSY. (Includes 2.4 gpf volume regulator)
11
# 8703
WHITE VOLUME REGULATOR
# 8704
GREEN VOLUME REGULATOR
# 8706
BLACK VOLUME REGULATOR
# 8708
BLUE VOLUME REGULATOR
12
# 8711
RANGE TOOL
13
# 34727
EC STRAP WRENCH
14
# 37171
7/64" HEX WRENCH
15
# 8461
VALVE BODY - LESS OPENING
16
# 8396
HANDLE CAP - SOLID
17
# SP795
VALVE BODY
18
# 8040
CP STOP COUPLING
19
# 8038
LOCK RING
20
# 8037
"O" RING
21
# 8039
|||||ADJ. TAILPIECE 2-1/16" (OTHER LENGTHS AVAILABLE)
22
Calll for Assistance
CONTROL STOP
23
# 8322
1" VP STOP CAP
23
# 8321
3/4" VP STOP CAP
CALL FOR TECHNICAL HELP

 

MAINTENANCE GUIDE FOR THE SLOAN G2 OPTIMA PLUS FLUSHOMETER
1
 PROBLEM:
  SENSOR FLASHES CONTINUOUSLY WHEN USER STEPS WITHIN RANGE
   
  CAUSE:
  A) UNIT IN START-UP MODE
   
  SOLUTION:
  A) NO PROBLEM. THIS FEATURE IS ACTIVE FOR THE FIRST TEN MINUTES OF OPERATION
2
 PROBLEM:
  VALVE DOESN'T FLUSH; SENSOR NOT PICKING UP USER
   
  CAUSE:
  A) RANGE TOO SHORT
   
  SOLUTION:
  A) INCREASE THE RANGE
3
 PROBLEM:
  VALVE DOESN'T FLUSH; SENSOR PICKING UP OPPOSITE WALL OR SURFACE OR ONLY FLUSHES WHEN SOMEONE WALKS BY. RED LIGHT FLASHES CONTINUOUSLY FOR FIRST TEN MINUTES EVEN WITH NO ONE IN FRONT OF THE SENSOR.
   
  CAUSE:
  A) RANGE TOO LONG
   
  SOLUTION:
  A) SHORTEN RANGE
4
 PROBLEM:
  VALVE DOES NOT FLUSH EVEN AFTER ADJUSTMENT
   
  CAUSE:
  A) RANGE ADJUSTMENT POTENTIOMETER SET AT FULL "MAX" OR FULL "MIN' SETTING
  B) BATTERIES COMPLETELY USED UP
  C) PROBLEM WITH ELECTRONIC CONTROL MODULE
   
  SOLUTION:
  A) RE-ADJUST POTENTIOMETER AWAY FROM FULL "MAX" OR "MIN" SETTING
  B) REPLACE BATTERIES
  C) CALL EQUIPARTS TO REPLACE ELECTRONIC CONTROL MODULE
5
 PROBLEM:
  UNIT FLASHES FOUR QUICK TIMES WHEN USER STEPS WITHIN RANGE
     
  CAUSE:  
  A) BATTERIES LOW
  SOLUTION:  
  A) REPLACE BATTERIES
6
 PROBLEM:
  VALVE DOES NOT SHUT OFF
     
  CAUSE:  
  A) BY-PASS ORIFICE IN DIAPHRAGM IS CLOGGED WITH DIRT OR DEBRIS, OR BY-PASS IS CLOGGED BY AN INVISIBLE GELATINOUS FILM DUE TO "OVERTREATED" WATER
  B) DIRT OR DEBRIS FOULING STEM OR FLEX TUBE DIAPHRAGM.
  C) O-RING ONSTEM OR FLEX TUBE DIAPHRAGM IS DAMAGED OR WORN.
  D) PROBLEM WITH ELECTRONIC MODULE
     
  SOLUTION:  
  A) REMOVE INSIDE PARTS ASSEMBLY AND WASH UNDER RUNNING WATER. NOTE: SIZE OF ORIFICE IN BY-PASS IS OF UTMOST IMPORTANCE FOR THE PROPER METERING OF WATER BY THE VALVE. EQUIPARTS RECOMMENDS THAT YOU DO NOT ENLARGE OR DAMAGE THIS ORIFICE. REPLACE INSIDE PARTS ASSEMBLY IF CLEANING DOES NOT CORRECT THE PROBLEM.
  B) REMOVE INSIDE PARTS ASSEMBLY AND WASH UNDER RUNNING WATER.
  C) REPLACE QUAD SEAL IF NECESSARY
  D) TURN SOLENOID COUNTERCLOCKWISE VERY SLIGHTLY
  E) REPLACE ELECTRONIC MODULE
7
 PROBLEM:
  NOT ENOUGH WATER TO FIXTURE
     
  CAUSE:  
  A) WRONG FLUSH VOLUME REGULATOR INSTALLED IN FLEX TUBE DIAPHRAGM KIT.
  B) WRONG OPTIMA PLUS MODEL INSTALLED (I.E. 1.0 GPF URINAL INSTALLED ON 3.5 GAL CLOSET FIXTURE)
  C) ENLARGED BY-PASS IN DIAPHRAGM
  D) CONTROL STOP NOT ADJUSTED PROPERLY
  E) INADEQUATE VOLUME OR PRESSURE AT SUPPLY
     
  SOLUTION:  
  A) INSTALL THE CORRECT REGULATOR
  A) REPLACE WITH PROPER OPTIMA PLUS MODEL
  B) REPLACE FLEX TUBE DIAPHRAGM
  C) RE-ADJUST CONTROL STOP
  D) INCREASE WATER PRESSURE OR SUPPLY (FLOW) TO VALVE
8
 PROBLEM:
  TOO MUCH WATER TO FIXTURE
     
  CAUSE:  
  A) WRONG FLUSH VOLUME REGULATOR INSTALLED IN FLEX TUBE DIAPHRAGM KIT.
  B) CONTROL STOP NOT ADJUSTED PROPERLY
  C) WRONG OPTIMA PLUS MODEL INSTALLED (i.e. 3.0 GPF MODEL INSTALLED ON 1 OR 1.5 GAL URINAL FIXTURE)
  D) DIRT IN DIAPHRAGM BY-PASS
     
  SOLUTION:  
  A) RE-ADJUST CONTROL STOP
  B) CALL EQUIPARTS AND REPLACE WITH PROPER OPTIMA PLUS MODEL
  C) CLEAN UNDER RUNNING WATER OR REPLACE INSIDE PARTS
BATTERY REPLACEMENT

When required, replace batteries with four (4) Alkaline Type AA Batteries. Note: Water does not have to be turned off to replace batteries. Loosen the two (2) Screws on top of unit. Remove the complete Cover Aseembly. Lift the Sensor Module from its Plate. Unplug the Electrical Connector from Battery Compartment Cover.Loosen the Retaining Screw on Battery Compartment Cover. Install four (4) Alkaline Type AA Batteries exactly is illustrated below.

Install Battery Compartment Cover and secure with Retaining Screw. Make certain that Battery Compartment Cover is fully compressed against Gasket to provide a seal. Do not overtighten. Plug the Electrical Connector into the Battery Compartment Cover. Reinstall the Sensor Module onto the Plate. Reinstall the complete Cover Assembly onto the Plate. Tighten the two (2) Screws on top of the unit.
CARE AND CLEANING INSTRUCTIONS

DO NOT use abrasive or chemical cleaners to clean Flushometers, they may dull the luster and attack the chrome or special decorative finishes. Use ONLY soap and water, then wipe dry with clean cloth or towel. While cleaning the bathroom tile, the Flushometer should be protected from any splattering of cleaner. Acids and cleaning fluids can discolor or remove chrome plating.
 
 
 

DOWNLOAD A PDF VERSION OF THIS GUIDE HERE.|
 
1
# 8421
C.P. LOCKING RING
2
# 8291
PLASTIC COVER W/ BUTTON
# 8399
METAL COVER W/ BUTTON
AND LOCKING RING
3
# 8403
PLASTIC COVER
# 8393
METAL COVER AND LOCKING RING
4
CALL FOR ASSISTANCE

ELECTRONIC MODULE
5
# 8401
OPTIONAL BEAM DEFLECTOR
6
# 8398
BASE W/ SOLENOID
7
# 8365
QUAD RING
8
INSIDE PARTS ASSEMBLY
# 8285
CLOSET 3.5 GPF
# 8415
CLOSET 1.5 GPF
# 8285
URINAL 3.5 GPF
# 8137
URINAL 1.5 GPF
# 8468
URINAL 1.0 GPF
9
# 8396
SOLID HANDLE CAP
10
# 8416
DECORATIVE HANDLE CAP
11
# 8040
C.P. STOP COUPLING
12
# 8039
ADJ. TAILPIECE - 2-1/16"
(OTHER LENGTHS AVAILABLE)
13
# 8037
"O" RING
14
# 8038
LOCKING RING
15
# 8419
1" DECORATIVE STOP CAP
# 8470
3/4" DECORATIVE STOP CAP
# 8322
1" VANDAL PROOF STOP CAP
# 8321
3/4" VANDAL PROOF STOP CAP
16
# SP795
VALVE BODY
17
# 8461
VALVE BODY
WITHOUT HANDLE OPENING
18
CALL FOR ASSISTANCE
CONTROL STOP
19
# 34727
EC STRAP WRENCH
20
# 8551
N/S COVER GASKET
 
Manual Flushometers | Manual Flushometer Parts | Electronic Flushometers | Electronic Flushometer Parts | Electronic Faucets | Electronic Faucet Parts
 
© 2004 Equiparts Corp. All Rights Reserved.